Are enlarged peroneal tubercle and accessory anterolateral talar facet associated with calcaneal spur?

BACKGROUND: As the anatomical variations of the foot, enlarged peroneal tubercle (EPT) and accessory anterolateral talar facet (AALTF) have attracted the attention of foot surgeons in recent years. However, EPT and AALTF have not been examined for a relationship with calcaneus spur (CS) as a common osteophyte. METHODS: The subjects were 369 individuals who died in northeastern Thailand and were preserved as skeletal specimens. The authors examined for the presence of left and right EPT, AALTF, and calcaneus spur (CS). We divided the EPT (+) group with EPT and the EPT (-) group without it and also divided the AALTF (+) group with AALTF and the AALTF (-) group without it. The age at death and the presence of CS were compared statistically between the EPT (+) and EPT (-) groups and between the AATLF (+) and AALTF (-) groups. RESULTS: Out of the total 369 cases, EPT was found in 117 cases (31.7%), AALTF was positive in 91 cases (24.7%), and CS was found in 194 cases (52.3%). In comparison between EPT (+) and EPT (-) groups, CS was significantly higher (p < 0.0001) in the EPT (+) group, but there was no significant difference in age at death. In comparison between AALTF (+) and AALTF (-) groups, there was no significant difference in age at death or CS. CONCLUSION: This study showed a strong relationship between EPT and CS, and the prevalence of EPT and AALTF by age in Thailand was first reported. We believe it helps to know the pathogenesis and biomechanism of EPT and AALTF. TRIAL REGISTRATION: Not applicable.

Intraosseous myolipoma of the calcaneus.

A man in his 40s presented with an incidental finding of an osteolytic bone lesion. He sustained an ankle injury while inline skating, fracturing his lateral malleolus. Besides the fracture, radiographic imaging on the day of the injury incidentally revealed a well-defined solitary osteolytic lesion with a sclerotic rim within the right calcaneus. MRI showed an intraosseous, fat-containing lesion with focal contrast enhancement, assessed as an intraosseous lipoma with central necrosis. In the pathological analysis of a sample of the lesion an intraosseous myolipoma of the calcaneus was found-an unexpected and extraordinary finding. To prevent pathological fracturing, curettage and bone grafting were performed using autologous iliac crest bone in combination with allogenous bone chips.

Beak-type fractures of the calcaneus.

Beak fractures represent a rare subtype of calcaneal fractures with potential risk of soft tissue complications due to compromised local perfusion. Early diagnosis and timely intervention are crucial to prevent necrosis, infection, and soft tissue defects. This case report describes a 71-year-old male with a beak fracture and delayed intervention with reoccurring soft tissue defects. Given the rarity of the condition, atypical presentation and need for urgent intervention, this emphasizes the importance of awareness of beak fractures of the calcaneus.

New point-of-care calcaneal ultrasound densitometer (Osteosys BeeTLE) compared to standard dual-energy X-ray absorptiometry (DXA).

Dual-energy X-ray absorptiometry (DXA) represents the gold standard for measuring bone mineral density (BMD). However, its size and bulkiness limit its use in mass screening. Portable and easily accessible instruments are more suitable for this purpose. We conducted a study to assess the repeatability, sensitivity, accuracy, and validation of a new ultrasound densitometer for the calcaneus (OsteoSys BeeTLe) compared to standard DXA. BMD (g/cm2) was measured at the femoral and lumbar spine levels using DXA (Discovery Acclaim (Hologic, Waltham, MA, USA) or Lunar Prodigy (GE Healthcare, Madison, WI, USA) devices). Bone Quality Index (BQI, a dimensionless measure of bone quality derived from measures of SOS [Speed Of Sound] and BUA [broadband ultrasound attenuation]) was measured with OsteoSys BeeTLe. The Bland-Altman test and simple linear regression were used to evaluate the association between values measured with the two instruments. Additionally, the ability of the T-score calculated with BeeTLe to identify patients with previous osteoporotic fractures was tested using ROC curves. A total of 201 patients (94.5% females) with a mean age of 62.1 ± 10.2 were included in the study. The BeeTLe instrument showed a coefficient of variation (CV, in 75 repeated measurements) of 1.21%, which was not statistically different from the CV of DXA (1.20%). We found a significant association between BQI and BMD at the femoral neck (r2 = 0.500, p < 0.0001), total femur (r2 = 0.545, p < 0.0001), and lumbar spine (r2 = 0.455, p < 0.0001). T-scores bias were 0.215 (SD 0.876), 0.021 (SD 0.889) and 0.523 (SD 0.092), for femoral neck, total hip and lumbar spine respectively. AUC for discriminating fracture and non-fractured patients were not significantly different with OsteoSys BeeTLe and standard DXA. In this preliminary study, BeeTLe, a new point-of-care ultrasound densitometer, demonstrated good repeatability and performance similar to DXA. Therefore, its use can be proposed in screening for osteoporosis.

Biomechanical characteristics of Sanders type II and III calcaneal fractures fixed by open reduction and internal fixation and percutaneous minimally invasive fixation.

BACKGROUND: This work investigated the differences in the biomechanical properties of open reduction and internal fixation (ORIF) and percutaneous minimally invasive fixation (PMIF) for the fixation of calcaneal fractures (Sanders type II and III calcaneal fractures as examples) through finite element analysis. METHODS: Based on CT images of the human foot and ankle, according to the principle of three-point fixation, namely the sustentaculum tali, the anterior process and the calcaneal tuberosity were fixed. Three-dimensional finite element models of Sanders type II and III calcaneal fractures fixed by ORIF and PMIF were established. The proximal surfaces of the tibia, fibula and soft tissue were constrained, and ground reaction force and Achilles tendon force loads were added to simulate balanced standing. RESULTS: The maximum stress was 80.54, 211.59 and 113.88 MPa for the calcaneus, screws and plates in the ORIF group and 70.02 and 209.46 MPa for the calcaneus and screws in the PMIF group, respectively; the maximum displacement was 0.26, 0.21 and 0.12 mm for the calcaneus, screws and plates in the ORIF group and 0.20 and 0.14 mm for the calcaneus and screws in the PMIF group, respectively. The values obtained from the simulation were within the permissible stress and elastic deformation range of the materials used in the model, and there was no significant stress concentration. The maximum stress and displacement of the calcaneus and implants were slightly lower in the PMIF group than in the ORIF group when fixing Sanders type II and III calcaneal fractures. CONCLUSIONS: This study may provide a reference for optimising the design of implants, the development of individualised preoperative plans and the choice of clinical surgical approach.

Achilles Tendon Stiffness in the Etiology of Sever Disease: A Shear Wave Elastography Study.

BACKGROUND: Sever disease is one of the most common causes of heel pain in growing children and adolescents. There is no consensus about etiology of Sever disease. METHODS: The study comprised 41 participants aged 8 to 13 years who visited the orthopedic outpatient clinic: 17 patients with Sever disease and 24 asymptomatic children. The middle third segment of the body of the Achilles tendon and the calcaneal insertion zone were separately assessed. Five measuring points for the quantitative value of each point were randomly selected. The color scale used in the Young's modulus shows the lowest values in blue and the highest values in red. The mean values were used for the statistical analysis. RESULTS: Less elasticity was detected at the insertional site for the control group (4.02 kPa versus 3.65 kPa), the situation was reversed in the body of the Achilles tendon and the elasticity of the study group was less than that of the control group (241.0 kPa versus 260.5 kPa). However, no statistically significant difference was found between the groups. CONCLUSIONS: In conclusion, no difference was found in Achilles tendon elasticity between patients with Sever disease and healthy individuals in both the tendon body and the calcaneal insertionof the tendon. Achilles tendon elasticity has not been found to play a role in the etiology of Sever disease.

Impact of sustentaculum tali screw positioning on radiographic and functional outcomes in calcaneal fractures.

BACKGROUND: To investigate whether accurate placement of sustentaculum tali screws have the impacts on the clinical efficacy of calcaneal fractures. METHODS: A retrospective analysis of 72 cases (73 feet) of calcaneal fractures from September 2015 to September 2019 treated with open reduction and internal fixation with sustentaculum tali screws was conducted. Patients were divided into the sustentaculum tali fixation group (ST group) and the sustentaculum fragment fixation group (STF group) according to the location of the sustentaculum tali screw placement. The functional outcomes at preoperative, 7 days and 1 year postoperative were collected and analyzed. RESULTS: In the ST group (40 feet), the Gissane's angle altered from (109.89 ± 12.13)° to (121.23 ± 9.34)° and (119.08 ± 8.31)° at 7 days and 1 year postoperative, respectively. For Böhler's angles altered from (11.44 ± 5.94)°, to (31.39 ± 7.54)°, and (30.61 ± 7.94)° at 7 days and 1 year postoperative, respectively. In the STF group (33 feet), Gissane's angle altered from (110.47 ± 14.45)°, to (122.08 ± 8.84)°, and (120.67 ± 9.07)° and Böhler's angle altered from (11.32 ± 6.77)°, to (28.82 ± 8.52)°, and (28.25 ± 9.13)° (P < 0.001). However, there was no statistically significant difference in functional outcomes at 1 week after surgery and 1 year after surgery (P > 0.05). The AOFAS scores at the final follow-up of the two groups: ST group (88.95 ± 6.16) and STF group (89.78 ± 8.76); VAS scores, ST group (0.83 ± 0.98) and STF group (1.03 ± 1.59), all differences were not statistically significant (P > 0.05). CONCLUSION: The position of sustentaculum tali screws has no significant difference on the short-term clinical outcome in patients with calcaneal fractures, while reliable fixation of screws to sustentaculum tali fragment can achieve similar clinical outcome.

Age Estimation Using Machine Learning Algorithms with Parameters Obtained from X-ray Images of the Calcaneus.

BACKGROUND: Determination of bone age is a critical issue for forensics, surgery, and basic sciences. AIM: This study aims to estimate age with high accuracy and precision using Machine Learning (ML) algorithms with parameters obtained from calcaneus x-ray images of healthy individuals. METHOD: The study was carried out by retrospectively examining the foot X-ray images of 341 people aged 18-65 years. Maximum width of the calcaneus (MW), body width (BW), maximum length (MAXL), minimum length (MINL), facies articularis cuboidea height (FACH), maximum height (MAXH), and tuber calcanei width (TKW) parameters were measured from the images. The measurements were then grouped as 20-45 years of age, 46-64 years of age, 65 and older, and age estimation was made by using these at the input of ML models. RESULTS: As a result of the ML input of the measurements obtained, a 0.85 Accuracy (Acc) rate was obtained with the Extra Tree Classifier algorithm. The accuracy rate of other algorithms was found to vary between 0.78 and 0.82. The contribution of parameters to the overall result was evaluated by using the shapley additive explanations (SHAP) analyzer of Random Forest algorithm and the MAXH parameter was found to have the highest contribution in age estimation. CONCLUSIONS: As a result of our study, calcaneus bone was found to have high accuracy and precision in age estimations.

Osteopenia and Osteoporosis Screening Detection: Calcaneal Quantitative Ultrasound with and without Calibration Factor Comparison to Gold Standard Dual X-ray Absorptiometry.

BACKGROUND: osteoporosis is a worldwide major health problem that normally diagnosed in advanced stages. So, an early detection at preclinical stage is now an interesting issue. A key factor to early diagnosis the disease is the used of noninvasive bone densitometry. Dual energy x-ray absorptiometry (DXA) is the gold standard techniques for the proposed. However, the high cost, non-widely available and exposed to ionizing radiation are still a drawback of the machine. Therefore, a cheaper, smaller and non-ionizing device such quantitative ultrasound (QUS) is now a favor alternative method, but the possibility of used QUS measurement instead of DXA is still limited due to their uncertainties. So, the aim of our study was to calibrated the QUS with the DXA to allowing the possible to establish a calibration factor (CF) to improve the measured value closer to the standard method. METHODOLOGY: 135 healthy men and women aged 30-88 years were recruited for lumbar spine/femoral neck DXA and calcaneal QUS scanning. The Pearson's correlation between T- and Z-score from the two systems were studied. Moreover, the sensitivity, specificity and percentage of diagnosed accuracy for both with and without CF were calculated. RESULTS: The significant correlation between the two systems showed a positive trajectory in highly correlation (r = 0.784-0.899). Analyses showed a higher sensitivity, specificity and reduced the misdiagnosed rates when applied the CF in QUS values. CONCLUSIONS: QUS results showed a significantly correlated with DXA results for both lumbar spine and femoral neck sites with some percentage differences. These differences can be reduced by applied an individual specific machine CF to improve a QUS results. As identification of high risk of osteopenia and osteoporosis to reduce the demand of DXA propose, using a QUS alternative method can be a reliable that provide a cheaper and lack of ionizing radiation.

Biomechanical effects of Evans versus Hintermann osteotomy for treating adult acquired flatfoot deformity: a patient-specific finite element investigation.

BACKGROUND: Evans and Hintermann lateral column lengthening (LCL) procedures are both widely used to correct adult acquired flatfoot deformity (AAFD), and have both shown good clinical results. The aim of this study was to compare these two procedures in terms of corrective ability and biomechanics influence on the Chopart and subtalar joints through finite element (FE) analysis. METHODS: Twelve patient-specific FE models were established and validated. The Hintermann osteotomy was performed between the medial and posterior facets of the subtalar joint; while, the Evans osteotomy was performed on the anterior neck of the calcaneus around 10 mm from the calcaneocuboid joint surface. In each procedure, a triangular wedge of varying size was inserted at the lateral edge. The two procedures were then compared based on the measured strains of superomedial calcaneonavicular ligaments and planter facia, the talus-first metatarsal angle, and the contact characteristics of talonavicular, calcaneocuboid and subtalar joints. RESULTS: The Hintermann procedure achieved a greater correction of the talus-first metatarsal angle than Evans when using grafts of the same size, indicating that Hintermann had stronger corrective ability. However, its distributions of von-Mises stress in the subtalar, talonavicular and calcaneocuboid joints were less homogeneous than those of Evans. In addition, the strains of superomedial calcaneonavicular ligaments and planter facia of Hintermann were also greater than those of Evans, but both generally within the safe range (less than 6%). CONCLUSION: This FE analysis study indicates that both Evans and Hintermann procedures have good corrective ability for AAFD. Compared to Evans, Hintermann procedure can provide a stronger corrective effect while causing greater disturbance to the biomechanics of Chopart joints, which may be an important mechanism of arthritis. Nevertheless, it yields a better protection to the subtalar joint than Evans osteotomy. CLINICAL RELEVANCE: Both Evans and Hintermann LCL surgeries have a considerable impact on adjacent joints and ligament tissues. Such effects alongside the overcorrection problem should be cautiously considered when choosing the specific surgical method. LEVEL OF EVIDENCE: Level III, case-control study.

The role of patient positioning in surgical fixation of the calcaneus fractures using the lateral extensile approach.

INTRODUCTION: Calcaneus is the most commonly fractured tarsal bone. Open reduction and internal fixation of the displaced intra-articular fractures is considered the gold standard treatment. The lateral extensile approach is the most commonly used approach, and usually, the patients are kept in lateral decubitus position. Recent study has descried calcaneus fracture fixation utilizing the lateral extensile approach with the patient in prone position. The aim of this study was to compare the postoperative radiological outcome, reoperation rate, operative and anesthesia time, infection and the wound complications rate between the two groups. METHODS: The data of 49 adult patients with unilateral closed calcaneus fracture underwent open reduction and internal fixation using lateral extensile approach were collected. Postoperative Bohler's, Gissane angles and complications rate were compared between the two groups. RESULTS: A total of 49 patients were included. Lateral position was utilized in 26 patients (53.1%), while 23 patients (46.9%) were operated in prone position. Majority of the patients were males 87.8% (43 patients), and the mean age of the patients was 31.12 ± 7.50. The most commonly mechanism of injury was fall from height in (91.8%) of the patients. The mean preoperative Bohler's angle was 9.33 ± 13.07 and increased to 22.69 ± 9.15 postoperatively. The mean preoperative angle of Gissane was 130.45 ± 26.98 whereas it was 124.76 ± 17.20 postoperatively. The mean postoperative Bohler's angle and angle of Gissane were significantly higher among patient who underwent fixation in lateral position (25.88 ± 6.62, 137.15 ± 11.17) when compared to the prone one (19.09 ± 10.35, 110.74 ± 10.81). There was no significant difference between the two groups regarding the reoperation rate (p 0.947), infection (p 0.659, operative time (p 0.688), anesthesia time (p 0.522) and wound complications (p 0.773). CONCLUSION: Surgical restoration of the Bohler's and Gissane's angles with the patient placed in the lateral decubitus position remains superior to the prone position with no difference in the complication rate between the two groups.

Classification of intraarticular calcaneal fractures: comparison of two classification systems.

PURPOSE: Accurately classifying displaced intraarticular calcaneal fractures (DIACFs) is essential for orthopedic surgeons to choose optimal treatment methods and provide results evaluation and communication. Many authors studying used Sanders classification reported moderate intra- and interobserver reliability. Taking the software opportunity of 3D virtual exarticulation, Goldzak updated French tri-dimensional Utheza classification, providing an alternative framework for classifying DIACFs. The aim of this study was to compare the intra- and interobserver reliability of Sanders versus Goldzak classification systems. METHODS: The CT scans of 30 patients with displaced intraarticular calcaneal fractures, treated in the same trauma center between 2014-2018, were analyzed by 16 medical doctors (specialists and residents in orthopedic surgery, specialists and residents in radiology), and classified according to Sanders and Goldzak classifications. The same images were sent on two separate sessions, in a randomized order. Interobserver reliability and intraobserver reproducibility were assessed using Kappa statistics and Gwet's AC1 coefficient. RESULTS: Interobserver reliability using Gwet reported a value of 0.36 for Goldzak classification and 0.30 for Sanders classification (corresponding to "fair assessment" in both cases). In absence of subclasses, "substantial assessment" was reported for Goldzak classification (Gwet of 0.61) and "moderate assessment" for Sanders classification (Gwet of 0.46). Goldzak system had a greater interobserver reliability in the group of radiology residents. Intraobserver reliability coefficient was 0.60 for Goldzak classification and 0.69 for Sanders classification, indicating a substantial agreement for both classifications. CONCLUSION: Despite the better view of the fracture lines provided by 3D reconstructions, this study failed to prove the superiority of Goldzak classification compared to Sanders classification for DIACFs.

Relationship between dietary characteristics and heel quantitative ultrasound parameters in postmenopausal women from the OsteoLaus cohort.

The role of dietary patterns in the development of osteoporosis is unclear. The heel quantitative ultrasound (QUS) is a potential alternative to Dual X-Ray Absorptiometry. Nutrients, foods, dietary patterns and compliance to dietary guidelines were compared between the lowest and the highest tertiles of QUS parameters [Broadband Ultrasound Attenuation (BUA), Speed of Sound (SOS), Stiffness Index (SI)], using data from the OsteoLaus cohort. Participants in the highest tertiles of QUS parameters (385 for BUA, 397 for SOS, 386 for SI) were younger, of higher body weight, and had less major osteoporotic fractures. Women in the highest tertiles of SI and BUA consumed more fat (35.1 ± 0.4 vs 33.9 ± 0.4 and 34.9 ± 0.4 vs 33.8 ± 0.4 gr/day for SI and BUA, respectively, p < 0.05), and complied less frequently with dairy intake guidelines [odds ratio (95% confidence interval): 0.70 (0.53-0.92) and 0.72 (0.55-0.95) for SI and BUA, respectively, p < 0.05] than women in the lowest tertile. No differences were found regarding dietary patterns, healthy dietary scores, or compliance to dietary guidelines. Postmenopausal women in the highest QUS tertiles were younger, of higher weight and BMI, consumed more monounsaturated fatty acids and less dairy and calcium than women in the lowest tertiles. No differences were found between QUS tertiles regarding dietary patterns.

Medializing Calcaneal Osteotomy for progressive collapsing foot deformity alters the three-dimensional subtalar joint alignment.

BACKGROUND: A medializing calcaneal osteotomy (MCO) is considered as one of the key inframalleolar osteotomies to correct progressive collapsing foot deformity (PCFD). While many studies were able to determine the post-operative hind- and midfoot alignment, alternations of the subtalar joint alignment remained obscured by superposition on plain radiography. Therefore, we aimed to assess the hind-, midfoot- and subtalar joint alignment pre- compared to post-operatively using 3D weightbearing CT (WBCT) imaging. METHODS: Seventeen patients with a mean age of 42 ± 17 years were retrospectively analyzed. Inclusion criteria consisted of PCFD deformity corrected by a medializing calcaneal osteotomy (MCO) as main procedure and imaged by WBCT before and after surgery. Exclusion criteria were patients who had concomitant calcaneal lengthening osteotomies, mid-/hindfoot fusions, hindfoot coalitions, and supramalleolar procedures. Image data were used to generate 3D models and compute the hindfoot (HA), midfoot (MA) - and subtalar joint (STJ) alignment in the coronal, sagittal and axial plane, as well as distance maps. RESULTS: Pre-operative measurements of the HA and MA improved significantly relative to their post-operative equivalents p < 0.05). The post-operative STJ alignment showed significant inversion (2.8° ± 1.7), abduction (1.5° ± 1.8), and dorsiflexion (2.3° ± 1.7) of the talus relative to the calcaneus (p < 0.05) compared to the pre-operative alignment. The displacement between the talus and calcaneus relative to the sinus tarsi increased significantly (0.6 mm±0.5; p < 0.05). CONCLUSION: This study detected significant changes in the sagittal, coronal, and axial plane alignment of the subtalar joint, which corresponded to a decompression of the sinus tarsi. These findings contribute to our clinical practice by demonstrating the magnitude of alteration in the subtalar joint alignment that can be expected after PCFD correction with MCO as main procedure.

Calcaneal Bone Biopsy Inconsistency between Specimens Obtained From Trephine and Fine Needle Biopsy Techniques.

Standardized methods for osteomyelitis (OM) diagnosis of the lower extremity have proven to be difficult. Preoperative probability of foot osteomyelitis necessitates a combination of clinical, laboratory, imaging evidence (i.e., X-ray, CT, MRI), and bone biopsy to guide diagnosis and treatment. In the recent past, the relative weight that clinicians give to these collections of data to advise potential surgical intervention has been challenged, particularly with histologic evaluation of bone biopsy-traditionally considered "gold standard" in OM diagnosis. This study seeks to further expand this dialogue by retrospectively comparing calcaneal bone biopsies performed by direct visualization trephine approach (performed by Surgeons) vs fine needle biopsy with fluoroscopy guidance (performed by Interventional Radiologists). Results obtained from 57 patients with suspected calcaneal osteomyelitis demonstrate that Trephine obtained samples are significantly more likely to produce histopathologic evidence of OM (p-value: .013), microbiologic evidence of OM (p-value: <.001) and have better histopathologic and microbiologic concordance (p-value: <.001) than calcaneal bone biopsies obtained from Fine Needle Biopsy with fluoroscopy guidance.

Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy.

PURPOSE: This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy. METHODS: MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle. RESULTS: The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters. CONCLUSION: The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.

Calcaneal tuberosity avulsion fractures - A review.

Calcaneal tuberosity avulsion fracture, an extra-articular injury, is a rare fracture caused internally by Achilles tendon driven following intense contraction of gastrocnemius-soleus complex, and externally by low-energy (possibly high-energy). Moreover, the risk of injuries of the skin and Achilles tendon around calcaneal tuberosity is closely related to Lee classification and Carnero-Martín de Soto Classification of calcaneal tuberosity avulsion fracture. Although the diagnosis confirmed by X-ray, digital imaging and computed tomography (CT), magnetic resonance imaging (MRI) should also be used to evaluate soft tissue. In recent years, the understanding of this fracture has witnessed the development of different internal fixation devices and surgical procedures. These advances have been further elaborated scientifically in terms of their ability to provide stable fracture reduction ad resistance to Achilles tendon forces. In order to obtain a comprehensive knowledge of the disease, this article reviewed the new understanding of the anatomy, typing, risk factors, and treatment modalities of calcaneal tuberosity avulsion fracture in recent years.

Comparison of the Outcomes of Plating, Screw Fixation, and Pinning in Sanders Type II Fractures: A Multicenter (TRON) Retrospective Study.

Calcaneus fractures Sanders type II have been historically treated with various modalities. However, few studies compared these procedures directly. The multicenter (TRON group) retrospective study compared the radiographic and clinical outcomes of operative procedures using Kirschner wires (K-wires), cannulated cancellous screws (CCSs) and plates. Between 2014 and 2020, 121 patients with Sanders type II calcaneus fractures were surgically treated in our group using K-wire (Group K: n = 31), CCS (Group C: n = 60) or plate (Group p: n = 30) fixation. We assessed the American Orthopedic Foot and Ankle Society (AOFAS) score and infection after operation as clinical outcomes and Böhler's and Preiss' angles as radiographic outcomes. The AOFAS scores of the 3 groups showed a significant difference, with Group P showing significantly inferior scores to Group C at 6 months postoperatively and at the final follow-up examination (p = .015 and p < .001, respectively). The rate of infection did not differ to a statistically significant extent, but the incidence in Group P tended to be higher in comparison to the other groups. Among the three groups, Böhler's angle did not differ to a statistically significant extent immediately after the operation (p = .113) or at the final follow-up examination (p = .383). Postoperatively, Preiss' angle did not differ to a statistically significant extent (p = .251) but was significantly smaller in the Group C at the final follow-up examination (p = .0331). In Sanders type II calcaneus fracture, CCS fixation may obtain the best functional outcomes.

The impact of sustentaculum tali fracture on clinical outcome in patients affected by isolated calcaneal fractures.

INTRODUCTION: The sustentaculum tali is displaced in almost half of calcaneal fractures and during surgical fixation represents one of the main reference points upon which the other bone has to be reduced. The purpose of this study was to investigate which subtalar joint fracture pattern is more frequently associated with sustentaculum tali involvement. Furthermore, correlation between postoperative clinical outcome and sustentaculum tali integrity was performed. MATERIAL AND METHODS: Patients with isolated calcaneal fractures were analyzed. Sanders-type fracture and involvement of both sustentaculum tali and calcaneocuboid joint were detected on computed tomography imaging; postoperative AOFAS scores were analyzed according to sustentacular involvement. RESULTS: Fifty calcaneus fractures in 47 patients were included in the final analysis. The sustentaculum tali was fractured in 18 cases (36.0%), thus contradicting its supposed constant position. Sanders type 3 and 4 fractures were more frequently associated with fractured sustentaculum than type 2 (p = 0.012). Sanders type 4 fractures were associated with displaced sustentacular fragment significantly more than type 2 and 3 (p = 0.043). Patients with intact sustentaculum tali reported significantly higher (p < 0.001) mean AOFAS scores than the uninjured group (84.4 ± 9.1 and 74.3 ± 9.5, respectively). CONCLUSION: Sanders type 3 and 4 fractures were more frequently associated with sustentaculum tali and/or calcaneocuboid joint involvement than simpler fractures. Injury of sustentaculum tali was related to significant worse postoperative clinical outcomes, underlying the relevance of this fragment on clinical course.

Are there associations between hip geometry and bone quality? An analysis on 3074 adults from a general population.

INTRODUCTION: Patients with reduced bone mineral density and altered hip geometry are susceptible for hip pathologies. Knowledge on associations between bone properties and hip geometric parameters might facilitate identification of patients at risk for hip pathologies. The aim of the present study was to identify associations of bone properties assessed by quantitative ultrasound (QUS) at the heel and hip geometric parameters like center-edge angle (CE), neck-shaft angle (NSA) and alpha angle. MATERIALS AND METHODS: Hip geometric parameters (CE, NSA and alpha angle) of 3074 participants from the population-based Study of Health in Pomerania were assessed on magnetic resonance imaging. QUS was performed on both calcanei providing broadband ultrasound attenuation (BUA), speed of sound (SOS) and stiffness-index. Based on the stiffness-index the individual osteoporotic fracture risk (low, moderate or high) was determined. Associations between QUS-based and hip geometric parameters were calculated in linear regression models adjusted for age, sex, body height and weight. Interactions of QUS markers with age and sex on hip geometric parameters were tested. RESULTS: Significant inverse associations between BUA (ß = - 0.068), SOS (ß = - 0.024) as well as stiffness-index (ß = - 0.056) and CE were present, while fracture risk was positively associated with CE (ß for high = 1.28 and moderate = 2.54 vs. low fracture risk). Interactions between BUA and sex as well as between SOS and age were detected in the models for CE. Furthermore, there was an inverse relation between fracture risk and NSA that was restricted to the moderate risk (ß for moderate vs. low fracture risk = - 0.60). There were no significant associations between QUS parameters and alpha angle. CONCLUSIONS: In the general population, several associations between QUS-based bone properties or fracture risk and hip geometry are present. Less dysplastic hips had a lower stiffness-index and a higher fracture risk, whereas more valgus hips had a lower fracture risk.